Berlin 24 Hour Plumbing Repair

When Worcester County residents need an emergency plumber, they call Landry Mechanical Inc Plumbing HVAC & Electric because we offer fast 24 hour plumbing repair and back up our work with a 100% satisfaction guarantee.

Plumbing problems strike when you least expect them. When they happen after hours or on the weekend, and waiting to book an appointment means water damage or extended inconvenience, you need a plumber you can count on. Landry Mechanical Inc Plumbing HVAC & Electric is the most trusted residential plumbing contractor in Berlin, Massachusetts, having proudly served customers since 2008.

Contact us today to schedule an appointment!

Berlin, Massachusetts 24 Hour Plumbing Repair and Replacement Services

Unfortunately, plumbing problems don’t always follow normal business schedules. So, what’s an emergency? Let Landry Mechanical Inc Plumbing HVAC & Electric give you the expert help you need in Berlin, MA.

Burst Pipes: Can cause significant water damage to your home’s structure and belongings. A sudden rapid leak can also drastically increase your utility bills and create potential hazards like electrical shorts.

Sewer Backup: When sewer lines back up, they can lead to sewage overflow in your home, which is unpleasant and poses serious health risks due to the bacteria and pathogens in waste.

No Hot Water: A sudden lack of hot water can be due to a malfunctioning water heater. This is often urgent in homes where instant hot water is essential for daily hygiene and kitchen use. This requires immediate inspection and repair to prevent further issues and restore normalcy.

Low Water Pressure: Losing water pressure throughout the house typically indicates a blockage or leak in the main water line. This requires a professional plumber to diagnose and fix.

Expert Hot Water Heater Repair and Replacements in Worcester County, MA

Most Berlin, MA, homeowners don’t think about their water heaters until they run out of hot water mid-shower or encounter a leak. Fortunately, most water heaters give clues before they fail, and here’s what to watch for.

Age: Most water heaters have a lifespan of about 8-12 years. Suppose your water heater is approaching or has surpassed this age range. In that case, consider a hot water tank replacement, especially if you’re encountering frequent issues or inefficiencies.

Rust and Corrosion: If you notice rust on the water heater tank or in the water itself, especially when you first turn on the hot water tap, it’s a strong indicator of corrosion inside the tank. Rust can lead to leaks and other failures; the only way to fix it is to replace it.

Water Leaks: Water pooling around the water heater’s base could be due to a loose connection or a cracked tank. If the tank has cracked, call a plumber immediately before the leak turns into a flood.

Noise: Rumbling, banging, or popping indicate sediment buildup in the tank, which could lead to premature failure.

Call Landry Mechanical Inc Plumbing HVAC & Electric and ask about our water heater maintenance service to keep minor issues from escalating and extend your water heater’s lifespan.

Our Berlin Clogged Drain Repair Services Company

Drain cleaners are marketed as safe, but they’re extremely toxic and can damage older pipes. Moreover, they break up clogs, causing them to go deeper in the system and potentially cause another problem.

Instead of relying on chemicals or home remedies, call a professional drain cleaning company like ours. We use high-tech equipment like motorized augers and hydrojetting systems to remove obstructions, leaving pipes free and clean.

Recent Jobs and Reviews in Berlin, MA

Job Locations and Reviews

Arrived on site for 3 year old Daikin minisplit system with 1 condenser and 5 indoor heads. Inspected condenser coils and evaporator coils and sprayed with coil cleansing spray. Cleaned filters. Inspected blower wheels. Inspected wiring and electrical. Inspected refrigerant pipe insulation. Measured temp splits, each head getting an 18+ delta T. Cycled each head and watched them run to ensure proper operation. The head in the main room has a significant amount of bacterial growth build up on the blower wheel and space inside the unit. I would highly recommend having a deep clean acid wash done on this head to remove all of the bacterial growth. The rest of the indoor heads look very clean and show little to no evidence of bacterial growth. The condenser coils have a good amount of build up on them and also could benefit from a deep clean. Installing a UV light on the head in the main room will help to keep this head clean and kill bacteria. - Deep clean main room minisplit head - De

Rosie P.Checked in 7 hours ago

Arrived on site for 3 year old Daikin minisplit system with 1 condenser and 5 indoor heads. Inspected condenser coils and evaporator coils and sprayed with coil cleansing spray. Cleaned filters. Inspected blower wheels. Inspected wiring and electrical. Inspected refrigerant pipe insulation. Measured temp splits, each head getting an 18+ delta T. Cycled each head and watched them run to ensure proper operation. The head in the main room has a significant amount of bacterial growth build up on the blower wheel and space inside the unit. I would highly recommend having a deep clean acid wash done on this head to remove all of the bacterial growth. The rest of the indoor heads look very clean and show little to no evidence of bacterial growth. The condenser coils have a good amount of build up on them and also could benefit from a deep clean. Installing a UV light on the head in the main room will help to keep this head clean and kill bacteria. - Deep clean main room minisplit head - De

Berlin, MA 01503

Options to replace the broken ac system or replace both systems

Zane F.Checked in 45 days ago

Options to replace the broken ac system or replace both systems

Berlin, MA 01503

-wire renovation Arrived at home for 2 ac units not working 1st floor Started by turning on the T stat and found the fan was not turning on. Tested capacitor and found it was okay. Wentt through wiring and found multiple wires were broken and burnt. Did a wire renovation and repaired all wires and started unit up. Hooked up guages and found it was running a little low. Took a. Temp split and found it wasn’t cooling as much as it should, but still cooling. Ighyl recommend also replacing the contatcor and motor as they are in poor shape. 2nd floor Started up the system and found everything turne don okay., hooked u my guages and found the system was fully flat on charge. Also found the outdoor coil was very dirty. This means there is a leak in the system and it lost its refrigerant. We will need to locate the leak in order to make repairs. Depending on where the leak is prices can change drastically. Also will need to perform feather diagnostics after leak is found and repaired to

Aaron C.Checked in 52 days ago

-wire renovation Arrived at home for 2 ac units not working 1st floor Started by turning on the T stat and found the fan was not turning on. Tested capacitor and found it was okay. Wentt through wiring and found multiple wires were broken and burnt. Did a wire renovation and repaired all wires and started unit up. Hooked up guages and found it was running a little low. Took a. Temp split and found it wasn’t cooling as much as it should, but still cooling. Ighyl recommend also replacing the contatcor and motor as they are in poor shape. 2nd floor Started up the system and found everything turne don okay., hooked u my guages and found the system was fully flat on charge. Also found the outdoor coil was very dirty. This means there is a leak in the system and it lost its refrigerant. We will need to locate the leak in order to make repairs. Depending on where the leak is prices can change drastically. Also will need to perform feather diagnostics after leak is found and repaired to

Berlin, MA 01503

Arrived on site for minisplit not cooling. Homeowner has a 1-1 fujitsu minisplit system, unsure of age. Minisplit head was showing code “95”, or “compressor rotor position detection error”. I reset the system at the disconnect and it started up again. Watched system run for over a half hour after resetting it and it ran with no issues, and had a perfect delta T temperature split of 18.6 degrees. This may have been a fluke with the system, homeowner mentioned it happened right after hitting the condenser with a leaf blower, so this may have loosened a connection and caused an issue and set off the error as well. The system does have white lineset, which has been known to cause issues with refrigerant leaks, but it does not seem to be an issue at this time, just something to keep an eye on. If the problem happens again we can come back out and reassess with tech support. Provided options for recommendations i have for the system at this time.

Rosie P.Checked in 63 days ago

Arrived on site for minisplit not cooling. Homeowner has a 1-1 fujitsu minisplit system, unsure of age. Minisplit head was showing code “95”, or “compressor rotor position detection error”. I reset the system at the disconnect and it started up again. Watched system run for over a half hour after resetting it and it ran with no issues, and had a perfect delta T temperature split of 18.6 degrees. This may have been a fluke with the system, homeowner mentioned it happened right after hitting the condenser with a leaf blower, so this may have loosened a connection and caused an issue and set off the error as well. The system does have white lineset, which has been known to cause issues with refrigerant leaks, but it does not seem to be an issue at this time, just something to keep an eye on. If the problem happens again we can come back out and reassess with tech support. Provided options for recommendations i have for the system at this time.

Berlin, MA 01503

Customer is looking to switch from a propane pool heater to a fully electric pool heater. Currently the customer has a 60 amp feed from the basement sub panel to the pool panel. The new electric pool heater will draw a total of 44 amps. It is our recommendation to pull an additional 20 amp circuit to the pool panel and separate the pool motor from the pool panel. In addition update the sub panel breaker from 60 amp to 100 amp breaker, since the wiring and panel will support the upgrade.

Jason B.Checked in 71 days ago

Customer is looking to switch from a propane pool heater to a fully electric pool heater. Currently the customer has a 60 amp feed from the basement sub panel to the pool panel. The new electric pool heater will draw a total of 44 amps. It is our recommendation to pull an additional 20 amp circuit to the pool panel and separate the pool motor from the pool panel. In addition update the sub panel breaker from 60 amp to 100 amp breaker, since the wiring and panel will support the upgrade.

Berlin, MA 01503

Whether you need tankless water heater services, electric and gas water heater services, or any other plumbing service, trust the pros at Landry Mechanical Inc Plumbing HVAC & Electric. Call 508-987-0080 to book your appointment in Berlin, MA.

Berlin 24 Hour Plumbing Repair

Berlin, Massachusetts 24 Hour Plumbing Repair and Replacement Services

Expert Hot Water Heater Repair and Replacements in Worcester County, MA

Our Berlin Clogged Drain Repair Services Company

Recent Jobs and Reviews in Berlin, MA

Job Locations and Reviews

Related Pages: