Emergency Plumber in Oxford

Plumbing problems wreaking havoc in your Oxford, MA, home? Call Landry Mechanical Inc Plumbing HVAC & Electric today!

Protect your plumbing system with high-quality hot water heater repair, clog removal, burst pipe services, sump pump replacement, and more. Landry Mechanical Inc Plumbing HVAC & Electric has been providing plumbing solutions in Worcester County for more than 15 years. If you need service in Oxford, MA, we’re here to help! Our technicians are certified and experienced and will arrive promptly to fix your plumbing malfunction with guaranteed accuracy and 100 percent customer satisfaction.

Need 24 Hour Plumbing Repair? Count On Us!

For the Worcester County area’s top emergency residential plumbing contractor, look no further! At Landry Mechanical Inc Plumbing HVAC & Electric, our local knowledge gives us a better understanding of environmental and infrastructural plumbing factors that may contribute to specific system issues and should be considered during the repair process.

Any water leaks, burst or frozen pipes, water or sewage backups, sump pump failures, suspected gas leaks, or electrical issues should be addressed by a professional plumber ASAP. Get in touch with our 24/7 live answering service to secure fast service in Oxford, MA.

Is your plumbing system due for service? Our membership plan helps you keep up with routine inspections and repairs.

Electric and Gas Water Heater Services

Landry Mechanical Inc Plumbing HVAC & Electric offers a variety of water heater services in Oxford, MA, including water heater maintenance and repairs, as well as hot water tank replacement.

Looking to upgrade your unit? Consider going tankless and enjoy increased energy efficiency, space savings, and endless and instant hot water availability. With our quick, quality tankless water heater services, you can install a new and improved water heater in no time.

Whether you need water heater help, clog removal, or pipe repairs, we deliver reliable solutions. Contact us to schedule an appointment for service ASAP!

Quality Clogged Drain Repair

You need a drain cleaning company you can trust to provide safe, long-lasting clog removal. Many clog-removal methods can damage your plumbing system and should be avoided, so instead of attempting a DIY fix, rely on our team of experts to get the job done right.

When the Landry Mechanical Inc Plumbing HVAC & Electric team provides clogged drain repair, we take the time to determine which method is right for your specific clog and plumbing system, guaranteeing the best possible results.

Keep hair, grease, and food particles out of your pipes to avoid drain blockages. If you suspect a clog, don’t wait to clear it, as it can evolve from an inconvenience to a major problem—and fast!

Recent Jobs and Reviews in Oxford, MA

Job Locations and Reviews

Arrived at home for tune up on ac system in basement, started by removing coil cover and inspecting the coil and metering device. Next checked drain to ensure no clogs. Removed and found filter to be pretty dirty Redmond replacing it (see picture for size) next inspected the indoor blower and motor and both were in good shape. Started up the system and took a temp split and it was sitting perfectly in spec. Took amp draw for indoor motor and it was good. Next went to outdoor unit and removed cover. Electrical componets were in good shape but recommend adding a hard start kit to help compressor start up. Took amp draw on compressor and outdoor fan and both were in spec. Noticed that the outdoor fan was making a griddy sound from the fan motor, this is more then likely being cause by the bearings starting to fail. If the bearings fail the motor will seize up and no longer be able to spin. System overall is working and cooling well.

Aaron C.Checked in 9 hours ago

Arrived at home for tune up on ac system in basement, started by removing coil cover and inspecting the coil and metering device. Next checked drain to ensure no clogs. Removed and found filter to be pretty dirty Redmond replacing it (see picture for size) next inspected the indoor blower and motor and both were in good shape. Started up the system and took a temp split and it was sitting perfectly in spec. Took amp draw for indoor motor and it was good. Next went to outdoor unit and removed cover. Electrical componets were in good shape but recommend adding a hard start kit to help compressor start up. Took amp draw on compressor and outdoor fan and both were in spec. Noticed that the outdoor fan was making a griddy sound from the fan motor, this is more then likely being cause by the bearings starting to fail. If the bearings fail the motor will seize up and no longer be able to spin. System overall is working and cooling well.

Oxford, MA 01537

Colin and his fiancée have recently moved into the house and have several concerns as the previous ow era brother did the work with no knowledge and created safety hazards all over. They want to remove the “temporary” carport and will need the electrical removed to do this. The pipe used to wire to the shed is plumbing pipe and not at all legal for electrical use. The generator that’s outside was wired with Romex exposed to the elements romex which it’s not rated for and the conductors are also not fully in the not weather tight junction box. Is also a 30 amp generator wired to a 50 amp circuit. There’s an old breaker box on the rear of the house that has many open holes that are supposed too covered but instead had the guts removed and the wires inside left exposed. The washer and dryer are new wires but were also Romex run exposed on the floor instead of in a pipe protecting them, the washer isn’t gfci protected and the dryer had an ungrounded cord and receptacle installed i

Samuel R.Checked in 10 hours ago

Colin and his fiancée have recently moved into the house and have several concerns as the previous ow era brother did the work with no knowledge and created safety hazards all over. They want to remove the “temporary” carport and will need the electrical removed to do this. The pipe used to wire to the shed is plumbing pipe and not at all legal for electrical use. The generator that’s outside was wired with Romex exposed to the elements romex which it’s not rated for and the conductors are also not fully in the not weather tight junction box. Is also a 30 amp generator wired to a 50 amp circuit. There’s an old breaker box on the rear of the house that has many open holes that are supposed too covered but instead had the guts removed and the wires inside left exposed. The washer and dryer are new wires but were also Romex run exposed on the floor instead of in a pipe protecting them, the washer isn’t gfci protected and the dryer had an ungrounded cord and receptacle installed i

Oxford, MA 01540

Close Main Water, Remove Old Valve, Install New Chrome Emergency Stop Valve Remaining balance to be collected before 09/19

Randy K.Checked in 3 days ago

Close Main Water, Remove Old Valve, Install New Chrome Emergency Stop Valve Remaining balance to be collected before 09/19

Oxford, MA 01540

Corey M.Checked in 3 days ago

Water leak -arrived to home for water dripping from boiler pressure relief valve -customer explained it has been dripping recently and he also stated the relief on the storage tank had blown off as well and he noticed the temp job was turned up pretty high so he turned it back down and the tank relief hasn’t gone off since -went to boiler and inspected unit -system pressure was at about 15 psi, called for heat from basement zone and watched boiler run to make sure pressure doesn’t increase to the point of relief going off -pressure reached about 23 psi before boiler cycled off at temp -expansion tank appears to be in good shape -pressure doesn’t increase while unit is in standby, so fill valve not leaking by -does not appear to have pressure increase from a leaking storage tank with street pressure leaking into the boiler loop -it is possible that because the storage tank was set too high that the boiler was running longer than needed and caused boiler relief to give, which can also ca

Oxford, MA 01537

Mike D.Checked in 4 days ago

Met with Richad to diagnose why his smoke detectors kept chirping. Each detector was making a random single chirp indicating a low battery. The batteries were all a few years old and needed to be replaced. The detectors themselves appear to be in very good condition and function properly dispute being near the replacement dates. Replaced batteries with customer supplied batteries.

Oxford, MA 01537

Your plumbing pipes are important. Call the experts at Landry Mechanical Inc Plumbing HVAC & Electric at 508-987-0080 to keep your system running smoothly in the Oxford, MA, area.